If the compression air dryer and drum dryer cannot be started or the power supply is abnormal, the main power supply and the protection switch are damaged and tripped. It is also possible to determine whether the power supply is short-circuited or connected incorrectly, and to check whether the power switch is damaged.

1. How to solve the problem of compressed air dryer.

1. If the voltage is abnormal, we need to follow the rated voltage on the nameplate to allow a small range of plus or minus 5%. The disconnection can be found in the power failure and can be repaired.

2. The failure of electrical components requires the tripping of the power switch and the electromagnetic protection switch or the occurrence of defects, which need to be replaced.

3. The overload protector and the high-voltage protection switch are tripped or defective and need to be reset or replaced. If the starting capacitor and the running capacitor are defective, the compressor needs to be replaced and the compressor needs to be replaced.

4. Tripping after starting: The failure of electrical components can be replaced according to the pressure switch failure. If the fan motor is defective, it can be replaced with a new one.

5. The defective overload protector needs to be replaced. Defective walker needs to be replaced. If the fan capacitor is bad, it should be replaced.

6. The supply of new tumble dryers can be started continuously when the conditions of use are not consistent or the operation is improper, and each start takes more than five minutes.

7. How to solve the problem of compressed air dryers. Dealing with pressure air volume overload can reduce air handling capacity.

8. If the inlet temperature of the dryer or the surrounding temperature is too high, it is possible to add a cooler or enlarge the model to improve ventilation.